Amiga hardware info, help and support with a focus (but not limited to) North American NTSC experiences. Open to all.
User avatar
nonarkitten

by nonarkitten posted Tue Jul 16, 2019 6:55 am

I've made a little board to fit an Indivison ECS into the Amiga 1000.
Image

It rotates every pin 180 around so that the Indy itself is facing away from the power supply. It's a little snug against the daughterboard, but as you can see, it fits.
Image

And here it is all booted up; R2 approves.
Image

These are super easy boards to build; I've uploaded the gerbers to OSH Park for anyone to print if they like. Grab some headers, solder and done.
https://oshpark.com/shared_projects/MoFmwGpa
User avatar
obitus1990
New Orleans, LA, USA

by obitus1990 posted Tue Jul 16, 2019 8:14 am

Nicely done!
User avatar
intric8
Seattle, WA, USA

by intric8 posted Tue Jul 16, 2019 10:28 am

Fantastic!
User avatar
intric8
Seattle, WA, USA

by intric8 posted Tue Jul 16, 2019 10:51 am

Jens sells a similar adapter, but he states very clearly it is only for the PAL version (non-daugtherboard models).

It looks like yours is aimed at the NTSC/daughterboard versions. I can't clap loudly enough! =)
User avatar
nonarkitten

by nonarkitten posted Tue Jul 16, 2019 11:00 am

intric8 wrote:Jens sells a similar adapter, but he states very clearly it is only for the PAL version (non-daugtherboard models).

It looks like yours is aimed at the NTSC/daughterboard versions. I can't clap loudly enough! =)


Yes, exactly. This should also work with the Rejuvenator as it may have the same problem. Denise is not rotated at all and although it's a little further from the PSU (do to socket offsetting), it would still collide with the video slot -- if anyone were so inclined to use it.
User avatar
EzdineG
Springfield, MO

by EzdineG posted Tue Jul 16, 2019 11:22 am

Thank you for sharing this board. I love the routing; you waste absolutely no room here!

I’ll be putting one to use for sure.
User avatar
nonarkitten

by nonarkitten posted Tue Jul 16, 2019 4:01 pm

EzdineG wrote:Thank you for sharing this board. I love the routing; you waste absolutely no room here!

I’ll be putting one to use for sure.

Thanks! The routing drove me crazy for the longest time -- I'm still wondering if there's a more optimal approach to this, but for now I'm happy it works, so on to something new.
User avatar
Christian

by Christian posted Thu Jul 18, 2019 2:24 pm

Thank you!!!

Who wants to do a small production run? I’d definitely be interested in one or two.
User avatar
intric8
Seattle, WA, USA

by intric8 posted Thu Jul 18, 2019 2:29 pm

I could use a board, too. I can see if any of the sea-ccc guys in Slack might bite. I assume a purchase produces a minimum of 10?
User avatar
EzdineG
Springfield, MO

by EzdineG posted Thu Jul 18, 2019 4:38 pm

Christian wrote:Thank you!!!

Who wants to do a small production run? I’d definitely be interested in one or two.

I haven't ordered mine yet, so I'd be in for one.

Who is online

Users browsing this forum: rpiguy9907 and 3 guests