Hi all.
I’m about to start building a couple of new psu’s fit my A500’s.
I have the power supply bricks (MW PT-65B) and the proper square din plugs.
I have the cable and I’m going to print cases.
I have a question about the pin connections in the power plug.
All the pics I have seen show the shield pin as the one lower left side when looking at the plug with the dimple on top.
Thing is, my testing with a multi-meter seems to show that the lower left pin is actually NC, and the yellow shield wire is actually connected to the square metal case of the plug.
Can anyone with experience please explain the discrepancy with all the images on the web vs what the meter is telling me ?
When I actually get underway with the build, I’ll be documenting it with some video and pics along the way.
I just need confirmation that I’m correct and the pin out pics are wrong ?
Thanks in advance.
Jason.