User avatar
walldog

Posted Wed Jan 01, 2020 4:23 pm

Hello.. Thought I would post a new topic.. When booting A590 Hard drive with Workbench 1.3 I am getting <unset> <unset> <unset> message then it finishes boot sequence to workbench. I recently setup this new hard drive but first I have seen this message. As far as I can tell everything is working correct. Anyone have this sort of error?

User avatar
walldog

Posted Wed Jan 01, 2020 6:05 pm

walldog wrote:
Wed Jan 01, 2020 4:23 pm
Hello.. Thought I would post a new topic.. When booting A590 Hard drive with Workbench 1.3 I am getting <unset> <unset> <unset> message then it finishes boot sequence to workbench. I recently setup this new hard drive but first I have seen this message. As far as I can tell everything is working correct. Anyone have this sort of error?
Problem solved... New Year.. Clock didnt like 2020 or didnt automatically cross over.. Used Date command to reset and save it in Shell and it resolved the issue.. For anyone future reference...

Happy New Decade I guess :)





Return to “Hardware”