Discuss your latest vintage Amiga finds!
User avatar
intric8
Site Admin
 
Posts: 835
Joined: Fri Jan 01, 2016 11:49 am
Location: Seattle, WA

The Phoenix has risen again

by intric8 Thu Nov 23, 2017 11:34 am

One of my most ambitious and exciting hardware conquests arrived yesterday in the post: an original Phoenix board for the Amiga 1000. I have no intention of disassembling my current mint 1000, but during the course of putting it together I have an extra case and PSU I can use for the new addition.

For those that don't know, as the original Phoenix board is very rare, I believe it was the original first-ever crowd funded hardware project for the Amiga. It was based out of Australia, and essentially was a complete redesign of the Amiga 1000 motherboard. Here's why that's so cool:
  • It uses all original chips and has all of the original ports, but it includes a Zorro II slot and a video slot.
  • Agnus gets replaced by Fat Agnus - all of the other chips get transferred over
  • KS 1.3 is pre-installed
  • It can hold up to 4 Kickstarts, which is nuts, and there is a physical switch that is installed to the plastic back panel to flip between two
  • It has an internal RS232 serial header just like the 2000
  • PGA FPU socket and oscillator socket
  • battery backed up clock and it is of the coin variety (no idea if mine is functional or not yet)
  • SCSI port for an internal hard drive. I don't have any extra mechanical ones at the moment (I think) but I do have an extra SCSI2SD card that needs a home. Hm...
  • And that's just the tip of the iceberg. Read more about it here.
In my mind, it fixes a lot of the deficiencies that the 2000 later rectified, but you get to do it within the confines of the 1000's gorgeous design.

Now, alongside this massively awesome piece of historically important hardware is also a mild accelerator board, the Blizzard Turbo Memory Board. Using a CPU off-setter, this machine should get to 14Mhz with 4MB RAM (upgradable to 8, but I'll probably just leave it at 4MB, which is plenty).

Very cool to be a new-comer to this very small club.

This is my winter hardware project. <3
IMG_2602.png
Front case sticker. I may create a new set based off the original design, as this is looking rather old. I bet there are 100 or so people out there that might like a new one, too.
IMG_2604.png
The motherboard pulled fresh from it's box from Australia.
IMG_2603.png
The original Phoenix board is covered in poetry. Talk about a labor of love.
IMG_2605.png
IMG_2606.png
IMG_2608.png
Original Phoenix motherboard manual. I should probably scan this at some stage.
IMG_2609.png
Signature on the board by Andrew Wilson, the designer of the Phoenix.

IMG_2516-board.png
Phase 5 Blizzard Turbo Memory Card, to likely be paired with the Phoenix
User avatar
LambdaCalculus
 
Posts: 141
Joined: Mon Jul 10, 2017 3:51 pm
Location: New Jersey, USA

Re: The Phoenix has risen again

by LambdaCalculus Thu Nov 23, 2017 12:46 pm

Rise, ye mighty Amiga, and take thy place in the universe! :D

phoenix.jpg
mattsoft
 
Posts: 57
Joined: Sun Jun 25, 2017 7:22 am

Re: The Phoenix has risen again

by mattsoft Fri Nov 24, 2017 7:16 pm

Woo-hoo! Glad she made it safely from the other side of the planet!
pgovotsos
 
Posts: 18
Joined: Thu Oct 26, 2017 7:15 pm

Re: The Phoenix has risen again

by pgovotsos Wed Dec 13, 2017 9:55 pm

I always go back and forth about which I like better - the Phoenix or the Rejuvenator. Sure in many ways the Phoenix gave you a more flexible system but keeping the original 1000 motherboard with the Rejuvenator always seemed more true to Amiga itself. The Rejuvenator was an upgrade no different (sort of) than any other. The Phoenix was great but at the cost of all of the original hardware.

Like I said, I never get a final decision for myself which is the best. Both were cool. So why try and decide - get both :)
Return to Conquests

Who is online

Users browsing this forum: No registered users and 1 guest