This week I put one of the brand new Rejuvenvator
2 clones in my daily driver A1k. I carefully removed the old original Rejuvenator by Expert Services
and put it in "Indiana Jones Storage" for the time being.
A good friend of mine on Rejuve Team USA built himself a new board (and cleaned up a couple areas of the BOM along the way) while simultaneously making one for me as well. I received it this week and immediately began to transfer chips from one board onto the other: Paula, Denise, 2MB chip with adapter boards, A3K Agnus and the new GALs.
I'll go into more detail on the ins and outs of this whole process later, but I wanted to at least show a couple of shots for the folks who've been following this project for the past three years that the end of the line is very close indeed.
Why we haven't released anything so far:
We haven’t been able to fully test the newly founded equations that were revealed only a week ago. We want to make sure every function works. We would like to make sure everything is perfect as possible before uploading the equations and announcing complete
success. So for a little while longer, we should still be in "prototype mode" until several of us can verify success.
And I'm on it.