My Rejuvenator is almost done...

[obitus1990]

Rejuvenator + Parciero = A1000 Awesomeness.

What revision is your A1000 motherboard? It's under the floppy drive.

Thanks!

I don't know, and have already put it all back together. That's the one thing I hate about the 1000 -- how much of a pita it is to open up and work on.

[EzdineG]

I don't know, and have already put it all back together. That's the one thing I hate about the 1000 -- how much of a pita it is to open up and work on.

No worries. Revisión 6 has a copper backplane, and yours certainly doesn’t. Was just checking for confirmation if it were possible.

Jeff’s Rejuvenator works, but J100 has the black screen effect and it won’t POST with Parceiro installed. The only difference is his motherboard revision thus far. We’re still researching.

[obitus1990]

I am curious to know if you put an 8372A 1MB Agnus in the socket, then populate the memory banks with the 1Mx4 adapter-borne RAM if it would use that as 1MB (even though it is 2MB there) instead of having to populate all 8 with the 256kx4 RAMs. Does anyone know?

[cooke]

A few more steps of assembly completed as parts arrive. These SOJ to DIP adapters are a pain (I hate soldering J-leg ICs)

With a knife tip they are easy to solder. I am using another kind of SOJ to DIP adapter, they are bit smaller and can fit on each socket.

Hi! New to this site and I hope its OK to ask. Where did you find the ram-adapters?

Thanks,

Bjorn

[luvwagn]

I am curious to know if you put an 8372A 1MB Agnus in the socket, then populate the memory banks with the 1Mx4 adapter-borne RAM if it would use that as 1MB (even though it is 2MB there) instead of having to populate all 8 with the 256kx4 RAMs. Does anyone know?

I've been wondering / hoping the same thing - future proof the RAM installation, and use with an 8372A while upgrading to an 8375 via adapter or something at a later point...