I'm in the process of reviving one of my A500s and picked up a Rgb2Hdmi board and the mating Pi Zero. I was wondering if anybody else has experience with this setup and if this is a plug and play mod? I haven't found any drivers or software that work on the Pi Zero side and I'm trying to get everything lined up before I pull my A500 out of storage and recap it.
After you prep your microSD card just install all the files in the latest release here:
https://github.com/hoglet67/RGBtoHDMI/r ... 21_156e2f0
Install the card into the Pi, install the Pi Zero on the RGB2HDMI Denise adapter, plug in your HDMI cable to your display, power up the A500 and should see an awesome image!
Oh yeah, have the menu button wired up also because you need to be sure the Amiga profile is being used. In addition, calibrating the display might be necessary as well if it does not look quite right.
Good luck!
https://github.com/hoglet67/RGBtoHDMI/r ... 21_156e2f0
Install the card into the Pi, install the Pi Zero on the RGB2HDMI Denise adapter, plug in your HDMI cable to your display, power up the A500 and should see an awesome image!
Oh yeah, have the menu button wired up also because you need to be sure the Amiga profile is being used. In addition, calibrating the display might be necessary as well if it does not look quite right.
Good luck!