I am getting the "Toaster unable to genlock" error when I start the video toaster.
The toaster worked about 7 years ago when I booted this up. Board looks good.
Amiga 4000 24+ MB ram
Amiga 1080 Monitor
Can it be a monitor thing? Should the 1080 work with the VT4000?
Thank you
Do you have a scan doubler fitted, or an Indivision type board installed? The toaster is very fussy about the Denise.
I do not have either. Is that the reason for the error . I notice the 1080 is very intolerant of display setting change.
My Toaster software will usually not start unless it is getting a video signal on input 1. Do you have a camera hooked up and turned on? Or a signal of some time going into input 1?
thank youDynamic_Computing wrote: ↑Wed Jun 10, 2020 8:59 amMy Toaster software will usually not start unless it is getting a video signal on input 1. Do you have a camera hooked up and turned on? Or a signal of some time going into input 1?
I just don't recall having to do that back in the day. I am going to try it once I find a cable with a BNC connector. Can it just be any video signal? I never had a genlocked source on it and I used it for Lightwave for years.
So after playing around with the GVP EGS Spectrum a while, I tried to launch the toaster and BOOM, it launched. I have no idea why it no longer has the genlock issue.